Watts Premier RO-Pure 4-Stage Reverse Osmosis System Review
Watts Premier RO-Pure 4-Stage Reverse Osmosis System Feature
- High end "Designer" chrome airgap faucet
- Easy to install
- Filters change out at the push of a button
- Each individually contained filter just snaps into place. Including the membrane.
This four stage reverse osmosis system consists of a stage 1 five micron Sediment filter that traps particulate matter like dirt, rust, and silt that will affect the taste and appearance of your water. Stage 2 is a five micron Carbon Block filter that helps ensure a greater reduction of chlorine and other materials that cause bad taste and odors (these are called PRE-filters because they filter in front of the reverse osmosis membrane). Stage 3 is the heart of the reverse osmosis system, the RO Membrane. This 50 gallon per day semi permeable membrane will effectively reduce TDS (total dissolved solids), Sodium and a wide range of contaminants such as Lead, Arsenic, Percolate, Chromium, Copper and Radium. It will also remove over 99.95% cysts such as Giardia and Cryptosporidium. The larger production membrane of this state of the art system also means this system has been designed to reduce Nitrates and Nitrites from your drinking water. It is important that this system is properly installed and maintained with a minimum incoming water pressure of 40 psi for it to operate as designed. Stage 4 is a high quality Carbon filter (this is called a POST-filter because it filters after the membrane). The filtered water passes through the membrane and enters the storage tank. When you're ready for a taste, it will leave the storage tank and pass through this fourth stage on its way up to the faucet. The end result? Crystal clear, high quality, and great tasting water!
In the Box:
RO Pure Reverse Osmosis module (complete with filters)
Parts Bag
1 3 Gallon Storage tank
1 Faucet bag
Instructions (manual)
0 ความคิดเห็น:
แสดงความคิดเห็น